to pop my bonnet someone has to push on it....... i pull and hold the popper in the cabin out and some one pushes then releases the bonnet and it pops WTF!!!!!!!!!!!!!!!! anyone know how to fix
Howdy , I had this problem and it was the factory holden cold air intake that sits over the radiator that was hitting the bonnet. also the matting that is on the bonnet sometime needs to be trimed. I moved the intake back about 2cm and no more problem! Hope this helps.
If u dont have a cai, a panel beater showed me this. look at the leading edge of the bonnet. if it sits higher than the front guards with it closed. then get a mallet and a rag. put the rag on the rad.support to cover the latch hole then hit it sqarely a couple of times. check it and keep goin until the front of the bonnets aligned with the guards, the support may have lifted slightly and this will fix it. you may need to adjust the striker aswell with a few terns either way?
Topic Locked
| Join the Forum to Rate this Topic at: 
Posted - 22 May 2008 : 7:42:27 PM
