Hi all i have got my hands on a (free) vz instrument cluster and i was wondering if any one has put one in a vn
1)if so how did you do it i have found a diagram of it here it is
Instrument Cluster Wiring Information
The following information pertains to the Instrument cluster wiring connector, as used by all VZ Commodore Models
Pin Wire Colour Circuit No Function 1 Orange/Yellow 1340 Battery +12 Volts 2 Brown/White 32 Panel Lamps Supply Voltage 3 Not Used 4 Brown/White 419 MIL Control 5 Light Green/Black 592 DRL Relay Control 6 Green/White 1061 UART Serial Data (Secondary) 7 Not Used 8 Not Used 9 Orange 192 Fog Lamps Switch Signal 10 Not Used 11 Blue 1315 Right Front Turn Signal Lamp Supply Voltage 12 Blue/Yellow 1969 Headlamp/HighBeam Relay Control 13 Light Blue 1314 Left Front Turn Signal Lamp Supply Voltage 14 Light Blue 264 Security Indicator Lamp Supply Voltage 15 Orange 238 Seat Belt Switch Left 16 Not Used 17 Black/Yellow 251 Ground 18 Brown 897 DIC Switch Low Reference 19 Not Used 20 Pink/Blue 539 Battery +12 Volts 21 Not Used 22 Not Used 23 Not Used 24 Not Used 25 Not Used 26 Pink/White 5197 Cruise Control I/P Signal 27 Brown/Red 121 Engine Speed Signal 28 Blue/Black 894 DIC Toggle Switch Signal 29 Not Used 30 Brown/Orange 33 Brake Warning Indicator Control 31 Brown/White 4 Accessory Voltage 32 Grey/White 746 Right Front Door Ajar Switch Signal
can i just re-wire my one into the connector plug and just plug it up to the cluster
i was just thinking does anyone know if the vz dash will fit in a vn if not 1) what would i need to change/cut 2) what would i do about the srs airbag ? should i try to connect it or not 3) and if i don't connect it will the airbag light come on or will it just set itself off and blow up in my face
also i have just had maxillofacial facial surgery and dont feel like hurting myself with a airbag
vz ss instrument cluster in a vn
| Join the Forum to Rate this Topic at: 
Posted - 01 Jun 2011 : 10:22:05 AM
