Hi, I like to know how hard to hook up the Calais dash to a Exec? At the moment I can not see any loose wires under the dash. Is it possible to hook it up. If so pictures would be great Where can I get the patch loom for the operation for the Calais (level 3) dash and how hard is it?
Best bet is to get an Instrument Panel wiring loom from a VN Calais, it plugs in where your loom is now (replaces it) and has all the plugs in it as needed.
Then you only need to run the yellow/black wire over to the empty connector on the ECU for fuel flow.
does the calais dash work without the loom i mean just the gauges like a level 2 as i have the dash but can't find a calais loom anywhere if any one knows where i can get my hands on one i will buy a carton of piss email me at cwright5@iprimus.com.au
Topic Locked
| Join the Forum to Rate this Topic at: 
Posted - 07 Apr 2005 : 3:48:48 PM
