| Author |
 Topic  |
|
| |
Current Topic Rating:  | Join the Forum to Rate this Topic at: www.VNCommodore.com Support Forums
|
|
|
ldolton
P Plater
17 Posts
 |
 Posted - 22 Feb 2006 : 7:15:36 PM
|
G'day guys just want to know if anybody knows if vns have a overflow for the air con and if so where is it located? i just got my air con updated and now it spews out water and floods my floor. any advice would be appreciated
thanks luke
|
|
Report to Moderator |
|
|
mouce
National Driver
1525 Posts
|
Posted - 22 Feb 2006 : 8:43:14 PM
|
I take it that the water that is coming out and flooding your floor is crystal clear water and really fkn cold. If so, the drain pipe for the condensor is blocked, 5 minute job tops.
Jack the car up, and crawl under there wearing swimming goggles (or safety glasses), and have a cable tie (zip-tie) with you too. If you have **** eyesight a torch might help as well! Get under from the driver's side and head to the gearbox. Have a look up along the transmission tunnel around the mid section of the gearbox. There should be a little black grommet (might look a bit like a small black dome). Using your fingers, have a poke around and work out how it opens up (there's no easy way to explain it), then EASE the cable tie in there and have a bit of a GENTLE poke around. You should be able to get about 5-7 cm of cable tie in there, twist it around a little bit, and try not to swallow any of the water coming out.
Go easy on jamming stuff in there though, because if you go too far too hard you'll poke holes right through your heater core (the dash and the aircon system have to come out to replace that, bloody GMH).
When you say you just had your a/c updated what do you mean? Just regassed or were new seals thrown at it too? |
Bite off more than you can chew, and chew like hell - Peter Brock (1945-2006) |
Report to Moderator  |
|
|
ldolton
P Plater
17 Posts
|
Posted - 23 Feb 2006 : 12:13:18 PM
|
my car still had all the old gas air con and needed to be changed because they dont use that type of gas anymore it cost about $500
Cheers for ur help i will do that ova this weekend.. also got a cold air intake to shove on too cant wait!!! |
| Report to Moderator |
|
|
davep
P Plater
43 Posts
|
Posted - 03 Mar 2006 : 08:37:14 AM
|
| Ouch $500 :( .. mine cost less than $200 to be converted and gassed |
| Report to Moderator |
|
| |
Topic |
|
Topic Locked
