Note: You must be registered in order to post a reply. To register, click here. Registration is FREE!
T O P I C R E V I E W
Posted - 25 May 2018 : 03:51:16 AM my ute has had new starter installed it wont fire. it has spark and fuel pressure up to injector rail. have primed injectors (yes not supposed to) then will run for feww seconds but horrible gear grinding noise SOMETIMES. like its ring gear but slightly higher up sound. we thought starter wasnt letting go after initial throw out so friend isolated wire solenoid and switched solenoid manually. this (starter) was not problem. am i left with possible crank angle sensor fault and/or blocked or stuffed injector(s) and/or both plus ring gear failure about to happen also . im stumped. have changed out neutral safety switch on trans selector also. please any ideas or wisdom much appreciated